Видео

Hi Ben, Thanks for your message. To have two 18mm panels face to face (glued together), you will need the "thickness split" function. To place the drillings in the correct position, you will need to create a fitting offset to this split, as the fitting will be placed on the two panel as if they were one. Alternatively, you could create a shelf or an upright offset 0mm from another panel and not have this problem. This will view the panels as individual for the fittings. Feel free to visit our Help Centre: wooddesigner.org/help-centre/ or contact us via our Support Forum: wooddesigner.org/forum/ if you have any further questions.

@@wooddesigner Thanks for the clarification! The fitting offset explanation makes sense. I'll try the thickness split method and adjust the fitting placement accordingly. Appreciate the help!

Hi there! PolyBoard can export part lists and integrate with cutting machines like Homag saws for labeling and barcodes, but to achieve full optimization features, you might need additional tools like OptiCut. Contact us at support@wooddesigner.org, and we’ll be happy to explore your specific needs further!

Hi there! You can't have this exact list. Although, in the Quick Design libraries you have access to models that contain lots of different projects and cabinets. You can download the libraries for free from our website.

@@wooddesigner give me the link direct to this labaririe from your website

@@khidmakhidma2734 Please visit our website and access the downlaod links directly from there, best wishes!

@@wooddesigner thank you

Thank you for your message, we appreciate it! Please visit our blog for more information: wooddesigner.org/?s=wreathed, and feel free to contact us if you have any questions: wooddesigner.org/contact/

That is possible, yes!

@wooddesigner I follow your videos and lessons, I use Optima Decor, I am not satisfied, I think we will work with you, but I want to see whether the photo is printed or not, I would appreciate it if you share the video, I want to watch the link, thank you, good job.

@@myalmamyalma1314 PolyBoard only exports in DXF 2D for VCarve, DXF 3D for CAD software, and 3DS for rendering software. Can you please contact our team at support@wooddesigner.org? We will be happy to discuss this further. Have a great day!

This is only possible with System 32, because when we use System 32, the elements are linked to it. This is not the case with a traditional link between panels.

@wooddesigner Clear, thank you!

Hi Ben, When creating a cover panel you can select the edge that needs edging. This will give you an option of adding edging information/edge tape. This will not be completed by default. In this example the matching edging was not actually edging, it was just the texture of the material.

@@wooddesigner Thank you for the explanation!

Hi there! This is correct. Using a mitre joint between the top/bottom and sides will fix the problem. If you have any more questions, don't hesitate to reach out to our technical advisors via our Assistance Forum.

Hi there, Profiling tooling names can be assigned so that it is recognised in your CAM software. Commonly, the profiling sequence is set-up in your CAM software.

@@wooddesigner thanks for your time

Hi Dan, Wedging is an available feature in StairDesigner, if you have specific questions on that, don't hesitate to get in touch with our team.

Hi @tsm809, thanks for your message and interest in PolyBoard. In reply to your question, that is either because of the colours assigned to your material, or the background colour of your 3D view. Both of these can be adjusted to suit your preferences. More info and all PolyBoard guides and tutorials in our Help Centre: wooddesigner.org/help-centre/. Don't hesitate to contact us if you have any further questions: wooddesigner.org/contact/.

Hi @SamZer-e2p, thank you for your message and interest in PolyBoard. Feel free to send us more information, and even a sketch, so we can understand better: wooddesigner.org/contact/.

jpg png 3d export ?

Hi Ahmed, This can be accomplished using PolyBoard. You will need to add a double back to your cabinet space and position it at the front of the cabinet. Once you've done this, set the top piece to a nill material, which will allow you to add a door to the top of the cabinet. This approach will create a bench with a door for storage.

@@wooddesigner i do this but i can't add a door its not clickable I work on ver 7.08

@@overpaidm Hi Ahmed, I recommend updating to the latest version of PolyBoard. You can update on our website, wooddesigner.org/ When adding a door, it's important to recognise what zone of your cabinet you have selected in PolyBoard. For any further technical assistance, get in touch with our team on the forum: wooddesigner.org/forum/

Hi Maher, PolyBoard uses overall dimensions. Therefore, the door needs to be allowed for when setting the cabinet depth.

Hi there, Part labels can be generated in PolyBoard. For parts to be labelled in the nesting formation, our OptiNest software allows this to be generated.

Hi Maher, PolyBoard operates based on overall dimensions. When adding a global door, it is important to account for this in the final measurements. For instance, if the cabinet depth is required to be 600mm and an 18mm door is to be added to the front, the overall dimensions should be adjusted to 618mm. If you need any further assistance, don't hesitate to reach out to our team at support@wooddesigner.org

Hi there! If you select a single zone on the left hand side and then select it for a second time, it will select the whole area as shown in this video. Each individual zone needs to be selected individually. Isolating two zones to be selected in this context is not possible at this time. If you need any further assistance, don't hesitate to reach out to our team at support@wooddesigner.org

Hi Maher, The best way to cut a groove in a panel for a strip light is through the inner tooling feature. You can select a panel, choose to edit the panel structure on the parameters screen, and create an inner tooling. Find more information on inner tooling here: wooddesigner.org/help-centre/polyboard-additional-design-features/

@@wooddesigner Thanks it was helpful, although you must include strip light in library in the future. regards

Thank you for your feedback!

Hi there, Can you please reach out to our team at support@wooddesigner.org and provide more details on your request? We will be happy to assist. Thank you.

Hi @barnadoceleb, thank you for your message! Register for free to download the demo version of our cutting list software optimization solution, and watch the video tutorials to get started fast: wooddesigner.org/opticut-download/ You can also contact us if you have any questions: wooddesigner.org/contact/ Have a lovely day!

​@@wooddesignerwhat is the other software you draw the cabinet on

Oh, I see now. The rule is between the edge of the hole and the inside face - that explains it. 🙃

@@Areyouoscar 6.5 = 17.5 from axis less 11 overlaps from side

Hi John, thanks for your feedback! As a suggestion, if you want an inexpensive software solution, plus access to expert advice, you could use our StairFile service: wooddesigner.org/stairfile-service/

Hi Sandor, thank you for your message! We are very happy to know that you enjoy using PolyBoard and OptiNest, and that our resources are useful to you! Don't hesitate to contact us if you ever need assistance or have any questions. Have a lovely day! :)

Happy to help! :)

Glad you liked it! :)

Hi, Sorry, PolyBoard 7 has been out for over 3 year, PolyBoard 6 If and the library were well out of date and no longer available, and For safety reasons, we advise against using PolyBoard 6. PolyBoard 7.10 now have our Quick Design librarie 7.6, with all standard fitting link, like Blum LegraBox and MerivoBox, Hettich AvanTech YOU , Grass NovaPro an Vionaro and more....

Hi there! These are called closed stringboards.

Hi, thanks for your message. This is done with regular compression cutters for CNC machines. Don't hesitate to contact us back if you have any further questions: wooddesigner.org/contact/

Hi there! We don't have a video where we made this cabinet, but I would recommend you watch the one available on the PolyBoard download page: wooddesigner.org/polyboard-download-software/

Thank you for your support! You're inquiring about version 7 of PolyBoard - the trial version is available for free on our website. Feel free to download it and give it a test run. If you're interested in purchasing the complete version, please don't hesitate to reach out to our support team at support@wooddesigner.org.

@@wooddesigner Thank you for your prompt response 🙂

Hi Mario, thanks for your comment! Please visit our website for more information and all our PolyBoard tutorials: wooddesigner.org/ There's a contact form you can use to reach out to us if you have any questions. Have a lovely day!

Glad it was helpful! :)

Hi! If your Polyboard views appear small, try these steps: 1) Check and adjust the zoom level in the document. 2) Modify the view settings in Polyboard. 3) Update your screen resolution settings, especially for high-res displays. 4) Ensure Polyboard is up-to-date. If issues persist, please send more details to our technicians via the forum: wooddesigner.org/forum/

It's never too late to start using fantastic tools! We're thrilled you like the software. Your channel is great, by the way. We'd love to connect more - feel free to reach out to us at support@wooddesigner.org, or share your email here. Looking forward to chatting more!

Hi, Please visit our website for more information and download: wooddesigner.org/polyboard-software-tools/

Hi Rami! The icons in the toolbar (and toolbars) are installed with our QuickDesign libraries, and they are available for free on our website's download page.

Hi Abhishek, thanks for your question. You can easily add glass drawers in either of these 2 conditions, by adding a spacer or 155° hinges. If you would like a more detailed reply on how to do so, our technical experts on our forum would be happy to help you wooddesigner.org/support-plans/- The Wood Designer Team

Hello Kulcsar, OptiNest only outputs in DXF and not to any other extensions. Feel free to contact us if you have any further questions: wooddesigner.org/contact/

Hi Ahmed, I'm sorry I don't understand your question, if you could please elaborate? Kind regards- WoodDesigner Team